Produk
250W Output Tunggal Waterproof Switching Power Supply seri LDV-250
250W Output Tunggalanti banyu NgalihPower SupplyLDV-250 seri
Efisiensi dhuwur, linuwih dhuwur, biaya murah
Proteksi: Sirkuit cendhak / Over load / Over voltase / Suhu dhuwur
Kelas anti banyu: IP67
Frekuensi kerja: 65 KHz
Cocog kanggo aplikasi tandha lampu LED lan obah.
garansi 2 taun
| SPESIFIKASI | |||
| OUTPUT | |||
| Model | LDV-250-12 | LDV-250-24 | LDV-250-36 |
| Tegangan DC | 12V | 24V | 36V |
| Rated Saiki | 20.8A | 10.4A | 6.9A |
| Range Saiki | 0-20.8A | 0-10.4A | 0-6.9A |
| Daya Rated | 249.6W | 249.6W | 248.4W |
| Ripple & Noise | 150mVp-p | 200mVp-p | 200mVp-p |
| Toleransi Tegangan | ± 1% | ± 1% | ± 1% |
| Stabilitas Inlet | ± 0,5% | ± 0,5% | ± 0,5% |
| Stabilitas Beban | ± 0,5% | ± 0,5% | ± 0,5% |
| Setup, Munggah, Tahan Wektu | 200ms, 20ms, 30ms/230VAC | ||
| INPUT | |||
| Range Tegangan | 180～264 VAC 47～63Hz；255～373VDC | ||
| Arus AC | 1.5A/230VAC | ||
| Efisiensi | 82% | 84% | 85% |
| Arus Inrush | Cold-wiwitan saiki 40A/230VAC | ||
| pangayoman | |||
| Over Load | 105%~135% | ||
| Perlindhungan: Mode hiccup, pulih kanthi otomatis sawise kondisi fault dibusak | |||
| Swara Tegangan | 30~32V | 42~44V | |
| Perlindhungan: Mode hiccup, pulih kanthi otomatis sawise kondisi fault dibusak | |||
| Dhuwur Tem. | ≥85 ℃ | ||
| Perlindhungan: ngethok output, pulih kanthi otomatis sawise kondisi fault dibusak | |||
| LINGKUNGAN | |||
| Suhu kerja, Kelembapan | -10 ℃ ~ + 60 ℃, 20% ~ 90% RH | ||
| Suhu panyimpenan, Kelembapan | -20 ℃ ~ + 85 ℃, 10% ~ 95% RH | ||
| Temp.Koefisien | ± 0,03% / ℃ (0-50 ℃) | ||
| Getaran | 10-500Hz, 2G 10min,/1siklus, Periode 60 menit, Saben sumbu | ||
| KESELAMATAN | |||
| Tahan Tegangan | I/PO/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | ||
| Ketahanan Isolasi | I/PO/P, I/P-FG, O/P-FG: 100M Ohm/500VDC | ||
| STANDAR | |||
| Standar Keamanan | EN61347-1 EN61347-2-13 IP67 | ||
| Standar EMC | EN55015 EN61547 EN61000-3.4 KELAS | ||
| LAIN | |||
| ukuran | Ukuran 230*125*55mm (L*W*H) | ||
| Bobot | 2,42 Kg | ||
| CATETAN | 1. Kabeh paramèter sing ora disebutake khusus diukur ing input 230VAC, beban dirating lan 25 suhu sekitar. | ||
| 2. Ripple & gangguan diukur ing 20MHz bandwidth kanthi nggunakake 12 "bengkong pasangan-kabel mungkasi karo 0.1uf & 47uf kapasitor podo. | |||
| 3. Toleransi: kalebu nyetel toleransi, angger baris lan angger-angger mbukak. | |||
Suhu kerja, Kelembapan
-10 ℃ ~ + 60 ℃, 20% ~ 90% RH
Suhu panyimpenan, Kelembapan
-20 ℃ ~ + 85 ℃, 10% ~ 95% RH
Temp.Koefisien
± 0,03% / ℃ (0-50 ℃)
Getaran
10-500Hz, 2G 10min,/1siklus, Periode 60 menit, Saben sumbu
KESELAMATAN
Tahan Tegangan
I/PO/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC
Ketahanan Isolasi
I/PO/P, I/P-FG, O/P-FG: 100M Ohm/500VDC
STANDAR
Standar Keamanan
EN61347-1 EN61347-2-13 IP67
Standar EMC
EN55015 EN61547 EN61000-3.4 KELAS
LAIN
ukuran
235*125*55(L*W*H)
Bobot
2,5 Kg
CATETAN
1. Kabeh paramèter sing ora disebutake khusus diukur ing input 230VAC, dirating mbukak lan 25 suhu sekitar.2.Ripple & gangguan diukur ing bandwidth 20MHz kanthi nggunakake kabel pasangan bengkong 12" sing diakhiri karo kapasitor paralel 0.1uf & 47uf.3. Toleransi: kalebu toleransi nyetel, regulasi garis lan regulasi beban.
